The previous 2 years have actually been terrific for the drone pastime. We have actually seen the release of numerous Mavic 3 drones, the Mini 3 Series, along with the brand new DJI Air 3.
If you are brand-new to the drone pastime and just recently got a Mavic 3 Pro, there are numerous things to discover to get up and flying in a prompt way.
This post and video will be detailed guides demonstrating how to power on and off the Mavic 3 Pro and the remote controllers in your particular Mavic 3 Pro Combination, whether the DJI RC Pro, DJI RC, or RC-N1
Note: We advise that all batteries for the Mavic 3 Pro and the remote controller( s) have actually been totally charged prior to following this detailed guide.
Leading Drone Courses
The Power Up/On Series
Like with the previous Mavic 3 drones prior to it, the Mavic 3 Pro includes numerous Combination alternatives:
Although not presently a Combination choice, the Mavic 3 Pro likewise deals with the DJI RC-N1 controller.
Some Mavic 3 Pro owners may choose to utilize the RC-N1 controller so regarding connect an even bigger and brighter gadget, such as the Tripltek line of commercial ultra-bright tablets.
Our Select
DJI Mavic 3 Pro (Fly More Combination)
Flagship Triple-Camera Drone with 4/3 CMOS Hasselblad Cam, 15km Video Transmission, 3 Batteries, Charging Center, and more.
We make a commission if you purchase, at no extra expense to you.
09/20/2023 03:01 am GMT
Despite what Combination was bought, DJI has a advised power-up series for the Mavic 3 Pro.
Mavic 3 Pro Start-up series in a nutshell:
- If you own a DJI RC or DJI RC Pro, the series is to turn on the RC (DJI RC Pro or DJI RC) and then the Mavic 3 Pro
- If utilizing a DJI RC-N1, the series is to turn on the Remote Controller initially Followed by switching on the Mavic 3 Pro, and finally, opening the DJI Fly app
” MORE: DJI Mavic 3– Many Typical Issues
Powering on the DJI RC Pro
Press the power button as soon as, then right away push & & hold the power button.
When you push the power button the very first time, the battery charge will be shown by means of the green LED lights. The 2nd press & & hold then powers on the remote controller.
There will be an audible beep to notify you to the RC powering on.
After the primary step, the DJI splash screen will appear at boot-up.
After about 10-20 seconds you will be at the DJI Fly house screen, all set to link the drone.
” MORE: How Precise Is “Discover My Drone” in the DJI Fly App?
Powering on the DJI RC
Like with the RC Pro, press the power button as soon as, then right away press & & hold the power button.
The DJI splash screen will appear at boot-up (with the exact same rising audible tone as the DJI RC Pro as soon as powered on).
After about 10-20 seconds you will be at the DJI Fly house screen, all set to link the drone.
” MORE: DJI RC vs DJI RC-N1 (All You Required to Know)
Powering on the DJI RC-N1
Action 1: Make certain the DJI RC-N1 is linked to your mobile phone or gadget.
Action 2: Press the power button as soon as, then right away push & & hold the power button.
When you push the power button the very first time, the battery charge will be shown by means of the green LED lights. The 2nd press & & hold then powers on the remote controller.
After the primary step, you will likewise get a rising audible tone, suggesting the controller is powered on.
Note: Lots of phones, as soon as linked to the RC-N1 controller, will turn the screen on as soon as the controller powers on, followed by a discussion box asking to release the DJI Fly app. You can pick to release the DJI Fly app at this time.
” MORE: Are DJI Controllers Interchangeable? (What You Required to Know)
Powering on the Mavic 3 Pro
Action 1: It is essential for you to get rid of the gimbal cover that is on the electronic camera. If this action is forgotten a lot of times, the gimbal might ultimately struggle with gimbal failure and break due to the fact that of the gimbal self-test.
Note: If you switch on the Mavic 3 Pro with the gimbal cover connected, the DJI Fly app will show a gimbal overload mistake message as soon as in live view.
Action 2: Press the power button as soon as ( towards the back of the Mavic 3 Pro) then right away press & & hold the power button.
Comparable to the 3 Remote Controller variations, the LEDs on the Mavic 3 Pro will illuminate letting you understand just how much battery power there is.
The motors will change somewhat, followed by an acoustic tone, after which the gimbal will self-test.
Note: You may need to open the DJI Fly app just IF you are utilizing an RC-N1 AND the DJI Fly app did not self-start when the controller powered on, as discussed previously.
” MORE: How to Combine the DJI RC Pro Controller with DJI Drone (Step-by-Step Guide)
Switching Off the Mavic 3 Pro (and RCs)
Like with the power-on series, DJI likewise has actually a suggested order for shutting down the Mavic 3 Pro and Remote Controllers.
This series is to very first shut off the Mavic 3 Pro, followed by switching off either the DJI RC Pro, DJI RC, or RC-N1 controller. In addition, if utilizing an RC-N1, closing down the DJI Fly app.
To shut off the Mavic 3 Pro:
To shut off the DJI RC Pro:
To shut off the DJI RC:
- Press the power button as soon as, then right away press & & hold the power button Like with the RC-N1, you will hear a coming down audible tone, suggesting the RC is powering off.
To shut off the RC-N1:
Press the power button as soon as, then right away press & & hold the power button You will hear a coming down audible tone, suggesting the RC is powering off.
After the RC-N1 is powered off, leave the DJI Fly app.